Opening

How to open tonneau cover?

To open a tonneau cover, release its latches or lock, then roll, fold or slide it toward the cab. The exact motion depends on whether the cover is a roll-up, folding or retractable style.

A soft roll-up cover opens from the rear: you unlatch the tailgate end and roll the vinyl forward. A folding cover unlatches and its hinged panels fold up toward the cab. A retractable cover slides back into a canister at the front of the bed and stays on the truck. Locking hard covers need the key or latch released first.

  • Soft roll-up tonneau covers are vinyl over a frame and open from the rear of the bed.
  • Hard roll-up tonneau covers use aluminum slats under vinyl and still roll toward the cab.
  • Folding tonneau covers use hinged panels, either soft for easy removal or hard for strength.
  • Retractable tonneau covers slide into a canister at the front of the bed and stay on the truck.
  • Most folding tonneau covers hold roughly 400–600 lbs when closed.

01Step-by-Step

  1. Unlock the cover: On a locking hard cover, turn the key or release the tailgate-handle lock first, since the latches won't move while it's engaged.
  2. Release the rear latches: Pull or squeeze the latches at the tailgate end of the cover, then lower the tailgate if it needs to sit flat for clearance.
  3. Lift the rear edge: Raise the tailgate end of the tonneau cover a few inches so it clears the bed rails and starts moving freely.
  4. Roll, fold or slide it forward: Roll a soft roll-up toward the cab, fold hinged panels up in sections, or push a retractable cover back into its canister.
  5. Secure it open: Strap a rolled soft cover to the front of the bed, or lock folded panels against the cab wall so they can't drop while driving.
  6. Check the bed before driving: Make sure no cargo, strap or loose panel edge can catch the cover, and confirm the cover is held firmly open.

02Common Mistakes

  • Forcing a locked cover: pulling on a hard folding or retractable cover before turning the key or releasing the latch can bend panels or strip the lock mechanism.
  • Opening from the wrong end: trying to lift a soft roll-up cover from the cab side instead of the tailgate end fights the clamps and stretches the vinyl.
  • Skipping the tailgate release: opening a retractable cover with the tailgate still up can jam the slats against it, which scuffs the paint and bends the rails.
  • Folding panels without clearing the bed: cargo stacked against hinged panels stops them from folding flat, which cracks the hinges and warps the frame.
  • Leaving a folded cover unsecured: panels left loose against the cab window can swing down while driving, so use the built-in straps or latches every time.